Written by the BuildHub research team · Last updated 17 July 2026 · Advertising disclosure
Nelson's sunshine is kind to concrete, but its hillsides are not. Half the driveways in Atawhai, Bishopdale and the Brook run on a slope, which changes everything about formwork, falls and price. This guide shortlists concrete crews that work Nelson and Tasman daily, then covers 2026 costs, the council's vehicle crossing process, and how to keep a hillside quote honest.
The best concrete contractor in Nelson is Nelson Concrete Contractors, a family-managed, insured operation based in Annesbrook and open six days a week, covering driveways, slabs and formwork, patios, resurfacing, retaining walls and decorative concrete across Nelson, Stoke and Richmond. For decorative work across the wider Top of the South, J & M Concreting is worth a look, and for house repiling with concrete work attached, Riverside Concrete is the specialist.
Summary
A plain concrete driveway in Nelson runs roughly $120 to $180 per square metre installed in 2026, with exposed aggregate at $150 to $240 and hillside sites adding meaningful cost for formwork and pumping.
Driveways and patios on your own land generally need no building consent, but any crossing that alters the kerb needs Nelson City Council approval before work starts, built to the Land Development Manual standard.
We shortlisted Nelson and Tasman concrete operators on trade focus, verifiable experience, and the practical signals that matter: written quotes, insurance and crews that handle slopes routinely.
The shortlist
Our research covered the Nelson and Tasman concrete market, from established firms to family crews working out of Richmond and Motueka. We weighed trade focus, service range, and what customers report publicly. Some businesses featured on BuildHub may have a commercial relationship with us. See the disclosure at the bottom of this page, and always get at least two quotes.
A Nelson-specific tip before the list: if your section is on a hill, ask every quoting crew whether the price assumes a concrete pump. Truck access on narrow hillside streets in Atawhai, the Brook and Bishopdale often forces a pump hire, and a quote that discovers this on pour day is a quote that grows.
Editor's Choice 2026
#1
Nelson Concrete Contractors
Nelson Concrete Contractors is a family-managed, accredited and insured outfit based at Annesbrook, with a service list that covers the jobs Nelson sections actually generate: driveways, patios and paths, slabs and formwork, concrete cutting and drilling, resurfacing, retaining walls, coatings and coloured decorative finishes. The business traces its establishment to 1992 and has specialised in concrete driveways since 2002, and it works right across the city from Nelson Central and Stoke to Bishopdale and Richmond.
Areas served: Nelson, Annesbrook, Stoke, Bishopdale, Nelson Central, Richmond and surrounding areas
Hours: Monday to Saturday, 7:00am to 6:00pm
Services: Driveways, slabs and formwork, patios, cutting and drilling, resurfacing, retaining walls, decorative concrete
Graycon Concrete Solutions is a family owned and operated business based in Nelson with a combined 42-plus years of experience in the concrete industry across its team. Graycon takes on work beyond the region as well, which usually signals a crew comfortable with commercial-grade specs, not just backyard paths.
Areas served: Nelson, with work across New Zealand
Focus: Concrete solutions, residential and commercial
Website: graycon.co.nz
Key facts and services
Family owned and operated, Nelson based
Combined 42+ years of concrete industry experience
Works on projects around New Zealand, not just locally
#3
J & M Concreting
J & M Concreting covers driveways, floor slabs, patios, paths and pool surrounds for residential and commercial clients, with a service area that runs from Nelson and Tasman through Motueka to Blenheim and Picton. That Top of the South spread makes them a practical option if your project sits outside the city, out toward Māpua, Motueka or the Moutere.
Areas served: Nelson, Tasman, Motueka, Blenheim and Picton
Focus: Driveways, floor slabs, patios, paths and pool surrounds
Website: jandmconcreting.co.nz
Key facts and services
Residential and commercial concreting
Covers the wider Top of the South, including Motueka and Marlborough
Pool surround experience, where falls and finishes matter most
#4
Concretemax
Concretemax is a Nelson owned and operated family business focused on concrete placing. Placing and finishing is the make-or-break stage of any pour: the same truckload of concrete can end up dead flat with crisp edges or wavy with burn marks depending entirely on the crew screeding it, so a placing specialist is a legitimate specialty.
Areas served: Nelson
Focus: Concrete placing and finishing
Website: concretemax.co.nz
Key facts and services
Nelson owned and operated family business
Specialist in concrete placing
The trade that determines the finish you look at for 30 years
#5
Riverside Concrete
Riverside Concrete is a family owned Tasman business that combines house repiling with concreting, covering earthworks, formwork, steelwork, concrete placement and finishing, and servicing Richmond and surrounding areas. If your concrete job is attached to a house levelling problem, older homes on piles around the Waimea Plains for instance, this is the niche they occupy.
Areas served: Richmond, Tasman and surrounding areas
Focus: House repiling, earthworks, formwork, concrete placement and finishing
Website: riversideconcrete.co.nz
Key facts and services
Family owned and responsive
Repiling plus concreting under one roof
Handles earthworks, formwork and steelwork as part of the job
What does concrete cost in Nelson?
Concrete work is quoted per square metre, supplied and laid. Indicative Nelson ranges for 2026:
Job type
Indicative installed cost
Plain grey driveway
$120 to $180 per m2
Coloured concrete
$150 to $220 per m2
Exposed aggregate
$150 to $240 per m2
Garage or shed slab
$110 to $170 per m2
Patio or path
$120 to $190 per m2
Concrete pump hire (hillside or no truck access)
$800 to $1,500 per pour extra
A 30 to 40 square metre single-car driveway typically lands between $4,500 and $7,000 in plain grey. Nelson's cost wildcard is terrain: sloped sections in Atawhai, the Brook, Tāhunanui hills and Bishopdale often need stepped formwork, more steel and a pump, which can add 20 to 40 percent over a flat Stoke section. All figures are indicative.
Sunshine bonus, with a catchNelson's dry, sunny climate is good news for scheduling pours, but hot nor'westerly days dry fresh concrete too fast and cause surface cracking. A good crew pours early morning in summer and keeps the slab damp while it cures. Ask how they manage hot-weather curing: the answer tells you a lot.
Consents and the Nelson City Council crossing rule
Flatwork on your land: driveways, paths and patios generally need no building consent. The low-risk exemptions are listed under Schedule 1 of the Building Act.
Vehicle crossings: where your driveway meets the street and the kerb needs altering, Nelson City Council requires a vehicle crossing application approved before you engage an installer, with construction to the standards in the council's Land Development Manual. The council can also require owners to upgrade crossings in poor repair.
Richmond and Tasman: if your property is over the boundary in Richmond, Tasman District Council rules apply instead, so name your suburb when you ask a contractor about paperwork.
Foundations and retaining: building foundations are restricted building work requiring a Licensed Building Practitioner, and retaining walls over 1.5 metres, or any wall supporting a driveway, need engineering input and consent. On Nelson's hills that combination comes up constantly.
How to compare concrete quotes in Nelson
Match the spec first. Concrete strength, slab thickness (100mm for cars is standard), mesh type and basecourse depth. Quotes only compare once these line up.
Get access costs stated. Pump hire, barrowing distance and crane access on hill sites should be line items, not surprises.
Ask about falls and drainage. On sloped Nelson sections, where the stormwater goes is a design decision. Water directed at a neighbour's boundary becomes your problem legally.
Confirm who handles the crossing application. If the kerb changes, the Nelson City Council approval must exist before work starts. Get the contractor's role in writing.
Check cutting and joints. Control joints should be planned and shown on the quote or sketch, not improvised on the day.
Frequently asked questions
How much does a concrete driveway cost in Nelson?
As of 2026, a plain grey concrete driveway in Nelson costs roughly $120 to $180 per square metre supplied and laid, with coloured concrete at $150 to $220 and exposed aggregate at $150 to $240 per square metre. A single-car driveway of 30 to 40 square metres typically lands between $4,500 and $7,000. Sloped sections needing a concrete pump or stepped formwork can add 20 to 40 percent. All figures are indicative: get itemised written quotes.
Do I need consent for a new driveway in Nelson?
The driveway on your own land generally needs no building consent, as concrete flatwork is low-risk work under Schedule 1 of the Building Act 2004. However, if the driveway connects to the street and the kerb must be altered, you need a vehicle crossing application approved by Nelson City Council before engaging an installer, and the crossing must be built to the council's Land Development Manual standards. Richmond properties fall under Tasman District Council instead.
What is the best concrete finish for a sloped driveway?
For steep Nelson driveways, grip matters more than looks. Exposed aggregate provides the best traction in the wet and is a popular choice on hill sections in Atawhai and Bishopdale. Broom-finished plain concrete is the budget alternative with decent grip. Smooth trowelled or heavily sealed finishes get slippery on gradients and are better kept for patios and garage floors.
How long does concrete take to cure in Nelson's climate?
You can typically walk on new concrete after 24 to 48 hours and drive on it after 7 days, with full design strength at 28 days. Nelson's hot, dry summer days are actually a risk: concrete that dries too quickly cracks, so crews pour early and keep slabs damp or covered. In winter the region's mild temperatures make curing straightforward compared with frost-prone inland areas.
Can I get my old cracked driveway resurfaced instead of replaced?
Sometimes. If the existing slab is structurally sound and the cracks are cosmetic, resurfacing or a decorative overlay costs significantly less than demolition and a new pour. If the slab has sunk, spread, or cracked through movement, resurfacing just paints over a problem that will return. A contractor who offers cutting, drilling and resurfacing as well as new pours, as several Nelson operators do, can assess which side of the line your driveway sits on.
Who is responsible for the vehicle crossing outside my Nelson property?
You are, even though it sits on council road reserve. Nelson City Council can require a landowner to upgrade a vehicle crossing that is in poor repair and poses a risk to road users, or that needs upgrading because its use has changed, for example after a subdivision. Factor that into the budget when replacing a driveway: doing the crossing at the same time is cheaper than doing it under a council notice later.
Ready to get quotes?
Start with our top pick, Nelson Concrete Contractors, then get at least one more quote to compare.
Disclaimer: This guide is general information, not professional advice. Pricing figures are indicative and vary by project. Rely on written quotes. Some businesses featured on BuildHub may have a commercial relationship with us; this does not change the factual information we publish about any business, and we encourage readers to get at least two quotes. Verify business details directly with each company before engaging them.