Written by the BuildHub research team · Last updated 17 July 2026 · Advertising disclosure
Aluminium has quietly taken over Auckland driveways, and for good reason: it shrugs off coastal salt air, never rots, and weighs little enough that automation motors last. The catch is that the market is crowded with resellers, fabricators and installers all quoting different things. This guide shortlists installers worth your time, then breaks down 2026 pricing, the consent position, and the one legal requirement automated gates always trigger.
The best aluminium gate installer in Auckland is Aluminium Gates Auckland, a Newmarket-based crew handling sliding gates, swing gates and custom aluminium designs across the city six days a week, with free onsite quotes and standard installations typically finished within 3 to 5 business days. For fully custom metalwork, Red Stag Gates and Fences fabricates to order, and for jobs north of the bridge, Silverdale-based Fabrication Specialists is handy.
Summary
A manual aluminium driveway gate in Auckland typically runs $2,000 to $6,000 installed in 2026, while automated sliding gate systems land around $7,000 to $12,000 with motor, keypad and intercom.
Gates and fences up to 2.5 metres generally need no building consent, but any mains wiring for gate automation must legally be done by a licensed electrical worker.
We shortlisted Auckland gate installers on fabrication capability, coverage, and the practical signals that matter: written quotes, site visits and realistic timelines.
The shortlist
Our research covered the Auckland aluminium gate market, from volume showroom operators to one-workshop fabricators. We weighed what each business actually makes versus resells, the styles they work in, and how they handle automation. Some businesses featured on BuildHub may have a commercial relationship with us. See the disclosure at the bottom of this page, and always get at least two quotes.
One tip before the shortlist: an aluminium gate quote is really three quotes in one, the gate itself, the groundwork, and the automation. Cheap headline prices usually mean one of the three has been left out. The comparison advice below shows what to pin down.
Editor's Choice 2026
#1
Aluminium Gates Auckland
Aluminium Gates Auckland covers the jobs most homeowners actually want quoted: sliding gates, swing gates, and custom aluminium designs from modern slatted looks to classic picket styles. They also remove and dispose of your old gate, which is the line item that quietly goes missing from cheaper quotes. Standard installations are typically completed within 3 to 5 business days, quick for a trade where six-week waits are common.
Areas served: Auckland and neighbouring areas
Hours: Monday to Saturday, 7:00am to 6:00pm
Styles: Sliding, swing, custom designs, slatted and picket
Red Stag Gates and Fences is an Auckland gate and security door manufacturer building custom metalwork in steel, aluminium and wrought iron. Their range runs from residential aluminium gates through to commercial hot dip galvanised steel cantilever gates, which tells you the fabrication capability is genuine rather than bolted-together kitset.
Areas served: Auckland
Focus: Custom gates and security doors in steel, aluminium and wrought iron
Website: redstaggatesandfences.co.nz
Key facts and services
Manufactures custom gates rather than reselling imported panels
Works across steel, aluminium and wrought iron
Handles residential gates through to commercial cantilever systems
#3
Fabrication Specialists
Fabrication Specialists is a Silverdale-based metalwork outfit that designs, fabricates and installs bespoke gates and fencing for homes and businesses. If you live in the Hibiscus Coast, Orewa or the northern fringe of Auckland, a fabricator based on your side of the harbour bridge can mean faster site visits and less travel padding in the quote.
Areas served: Silverdale and wider Auckland
Focus: Bespoke gates, driveway gates, pedestrian entries and fencing
Website: fabricationspecialists.co.nz
Key facts and services
Design, fabrication and installation handled in house
Based in Silverdale, well placed for North Shore and Hibiscus Coast jobs
Builds secure driveway gates, pedestrian entries and fencing to spec
#4
PW Metalworx
PW Metalworx is a local Auckland company offering onsite welding and general engineering, with a certified welder covering custom builds including aluminium gates and sliding and automatic driveway gates. A small engineering shop like this is the right call when your driveway is steep, angled or otherwise refuses to fit a standard gate.
Onsite welding and general engineering alongside gate work
Suits awkward driveways that need a made-to-measure solution
#5
LS Engineering
LS Engineering is a small Mt Albert-based fabrication company that welds and manufactures custom gates and balustrades in aluminium, steel, stainless and wrought iron, including cantilever and automated driveway gates. For a gate that is not on anyone's standard price list, an odd width, a matching balustrade, ornate detail, going straight to a fabricator who also handles the galvanising and powder coating stage usually beats buying off the rack.
Areas served: Auckland wide
Focus: Custom gates and balustrades, mobile welding
Base: Mt Albert
Key facts and services
Small fabrication company based in Mt Albert
Works in aluminium, steel, stainless and wrought iron
Builds cantilever and automated gates
Finishes include hot dip galvanising and powder coating
What does an aluminium gate cost in Auckland?
Aluminium gates are quoted as a package: the gate, the posts and groundwork, and any automation. Realistic Auckland ranges for 2026, all figures indicative:
Gate type
Indicative installed cost
Aluminium pedestrian gate
$800 to $2,000
Manual single swing driveway gate
$2,000 to $4,500
Manual double swing driveway gate
$3,000 to $6,000
Automated swing gate system (motor, two remotes)
$5,500 to $8,500
Automated sliding gate (motor, keypad, intercom)
$7,000 to $12,000
Premium automated system (video intercom, solar)
$12,000 to $20,000+
What pushes a quote up: wider openings needing two leaves or a longer sliding gate, the concrete track a sliding gate runs on, trenching power to the gate line, and custom infill patterns. Sloping driveways often force a sliding gate where a swing gate would clash with the ground, and sliding systems cost more.
Money saving tipIf you might automate later, say so now. Having the installer lay a power conduit and size the posts for a motor during the original install costs little. Retrofitting power across a finished concrete driveway is the expensive version of the same job.
Consent, wiring and the rules that apply
Building consent: gates and fences up to 2.5 metres high generally need no building consent under Schedule 1 of the Building Act. Almost every residential driveway gate sits well under that.
District plan rules: Auckland Council's Unitary Plan can still limit fence and gate height near street frontages in some zones, and corner sites have sight-line rules. Worth a quick check with the council before committing to a tall solid-infill design.
Electrical work: connecting mains power for a gate motor is prescribed electrical work and must be done by a licensed electrical worker registered with the Electrical Workers Registration Board. A gate installer who shrugs at this question is telling you something.
Automation safety: a motorised gate is a moving machine. Ask how the system handles obstructions, where the safety sensors sit, and what stops the gate closing on a child or a car. Get the answer in writing.
How to compare aluminium gate quotes
Fabricated or imported? Ask whether the gate is made to measure locally or a standard imported panel cut to fit. Both can be fine, but they should not be priced the same.
Powder coating spec in writing. Coastal Auckland suburbs need a marine-grade coating. Ask for the coating system and its warranty, not just the colour.
Groundwork itemised. Post footings, the concrete track for sliders, and trenching for power should each appear as line items.
Automation brand and support. Which motor brand, what warranty, and who services it in five years when a remote dies?
Old gate removal. Confirm removal and disposal of the existing gate is included, or you will be paying a second contractor to do it.
Frequently asked questions
How much does an aluminium driveway gate cost in Auckland?
As of 2026, a manual aluminium driveway gate in Auckland typically costs $2,000 to $6,000 installed depending on width and style, while automated systems run from around $5,500 for a basic swing setup to $7,000 to $12,000 for a sliding gate with motor, keypad and intercom. Premium systems with video intercom or solar power can exceed $20,000. These are indicative figures: get itemised written quotes for your driveway.
Do I need building consent for a driveway gate in Auckland?
Generally no. Gates and fences up to 2.5 metres high are exempt from building consent under Schedule 1 of the Building Act 2004, and residential driveway gates sit well under that height. Auckland Council's Unitary Plan can still restrict fence and gate heights near street frontages in some zones, and corner sites have visibility rules, so check with the council if your design is tall or solid.
Can anyone install an automatic gate opener?
The mechanical installation can be done by a gate installer, but connecting mains power to the motor is prescribed electrical work under New Zealand law and must be carried out by a licensed electrical worker registered with the Electrical Workers Registration Board. Reputable gate companies either employ a licensed electrician or subcontract one, and you should receive electrical certification for the connection.
Are aluminium gates better than steel or timber in Auckland?
For most Auckland homes, yes. Aluminium does not rust, which matters in coastal suburbs where salt air destroys untreated steel, and it never rots or needs restaining like timber. It is also light, so automation motors work less and last longer. Steel wins where you need maximum strength or a wrought iron look, and timber wins on traditional character, but aluminium is the low-maintenance default.
Sliding gate or swing gate: which should I choose?
It usually comes down to your driveway. Swing gates need clear, reasonably level space for the leaves to open, and they are the simpler and often cheaper option. Sliding gates suit short, sloping or steep driveways because the gate travels along the fence line instead of swinging out, but they need a concrete track and side room for the gate to slide into, which adds cost.
How long does gate installation take?
Once the gate is fabricated, installation of a standard aluminium gate typically takes 1 to 3 days: setting posts in concrete, hanging or tracking the gate, and commissioning any automation. Some Auckland installers, including Aluminium Gates Auckland, complete standard installations within 3 to 5 business days of confirming the job. Custom fabrication adds lead time, so ask for the full timeline in your quote.
Ready to get quotes?
Start with our top pick, Aluminium Gates Auckland, then get at least one more quote to compare.
Disclaimer: This guide is general information, not professional advice. Pricing figures are indicative and vary by project. Rely on written quotes. Some businesses featured on BuildHub may have a commercial relationship with us; this does not change the factual information we publish about any business, and we encourage readers to get at least two quotes. Verify business details directly with each company before engaging them.